Zum Inhalt der Seite
 
 

Details

QUICK PAVE

While paving with asphalt it often occurs that the working-width has to be changed for a short period in order to pave bays, gateways etc. which exceed the current screed width by less than a meter.
This problem is normally solved by shovelling the paving mixture on to the space protruding the screed and then scraping the surface by hand until required thickness is achieved

In order to optimize this tedious procedure and at the same time gaining a better paving quality we have constructed the new side sliding device quick pave, which enables to carry out the above mentioned procedures more efficiently. The new and patented quick pave has been designed to be mounted on to any paver or screed type independent of brand and manufacturer.


Special Features

The screed does not require major modifications and can always be put back into the original conditon.

The following technical variants and procedures are possible:

  1. Side-sliding adjuster quick pave with manual hydraulic pump/cylinder complete adjustable side plate for easy mounting to the screed body side bar optional in exchange with original side bar manual hydraulic quick-adjuster as well as fine adjustment with two mounted splindles after mounting the device, using simple screw joints, you can start work immediately.

  2. Side-sliding adjuster quick pave with electrically driven hydraulic cylinder complete, adjustable side plate for easy mounting to the screed body side bar optional in exchange with original side bar manual hydraulic quick-adjuster as well as fine adjustment with two mounted spindles the hydraulic cylinder of the side plate adjustment can be connected to the basic machinery with an hydraulic kit on the site. After the side plate is screwed on to the screed you can start work immediately.
The device can be additionally
equipped with the following options:


  1. Foldable, lockable and in height adjustable scraping device to scrape the paving material off at the required thickness

  2. Plugable, quick-changeable, heated profile tools which are situated on the inner side of the scraper to form a precise curb-edge at the road side. The customer can order form of tool according to requirement

  3. The runner of the quick pave is also equipped with a quick-changing-system, the finish of which can also be chosen by the customer according to requirement
 
 
MPW Constuction Machinery | info @ mpw-germany.com | impressum zur www-version