Special Features
- Using simple measures, the paver can be re-equipped so that the driver can work in the usual way but moving backwards. No major adjustments are required of the driver when working with machinery.
- Due to the fact that paving takes place along-side the paver, optimal control of the
paving process by the driver is made possible. - The paver is equipped with a signal light unit indicating green-red-green which assists communication with the driver of the material feeder concerning optimal influence when amending mixture conveyance.
- 100 % insurance can be given that no material can drop in to the vicinity of the pavers path, due to horizontal conveyance of the paving material.
- A balanced working condition of the paver is reached by ballasting the standard material hopper. Mixture conveyance from the feeder truck has no negative influence on the static performance of the under-carriage.
- The push rollers to dock the truck on to the paver can be adjusted easily and so can be fitted on to the trucks.
- A second horizontal auger serves to empty the far side paving material completely and to guide the paving material to the working side.
- The material hoppers are shiftable and can be slid-in when the machine is being
moved so that the working-width is around 2,5 m. The hopper can also be tipped up. - Regulation of layer thickness is supported via four hydraulic cylinders
(two in the front and two at the back), enabling a very sensitive grade control
resulting a level paving. - The same result can be achieved by paving with a levelling system of following variants: one sensor, two sensors or with a horizontal slope sensor.
- The receptacle plate for screed installation is mounted on to the tension arm of
working side. The screed can be adjusted with no allowance to required working width on a guide mandril. Besides the normal set-up, directional correction can be carried out – comparable to extension screeds – by using an associated hydraulic system. - By choosing torque and tamper-lifting set-up the operating performance of
compression can be coordinated with the installed tamper compression aggregate. - The generator installed in the paver, powers the heating rods for tampers and
screed plates. - In opposition to other pavers the side limitation of the screed is not static but can
be moved, enabling reduction of the real working width to a minimal size
(up to 15 cm) if required. - To ensure that the paving material is spread in front of the screed, even at high working widths, the material screed is supported by two hydraulically-driven paddles.
Technical data
Basic paver: | VÖGELE „Super 1502“ | | ||
| ||||
Weights: | Tractor: | 10.500 kg | ||
Material hopper with pushing device: | 1.800 kg | |||
Screed 750 mm: | 235 kg | |||
Transport dimensions: | Width: | 2.500 mm | ||
Length when hopper is tipped: | 5.500 mm | |||
Power unit: | DEUTZ diesel engine type F4L912 51 kW (70 hp) at 2650 rpm | |||
Under-carriage: | 2 Front wheels mounted on oscillating axle | |||
2 Rear wheels at driving axle with locking differential | ||||
Steering: | axle pivot steering with hydraulic-steering cylinder | |||
Note (!): | Changing direction demands modification of steering Machine is not appropriate for use in traffic. | |||
Speeds: | Paving | 1,2 bis 8 m/ min | ||
Material hopper: | Variable slide, max height (extended) | 800 mm | ||
Truck push roller system: | Variable, adjustable | |||
Horizontal material conveyance: | Seperately driven, regulated up to max. 60 rpm, rotating auger shafts. Mounted with 250 mm auger blade segments that convey the paving Material from the front of the trough to the end. On demand, horizontal conveyance can be supported by hydraulically driven auxiliary paddle | |||
Paving screed: | Width of screed | 750 mm | ||
2 x coupling within selection scale hydraulically | 1.500 mm | |||
Sides slidable up to: | 150 mm | |||
With mechanical spindle bendable up to: | 20 % | |||
Electrically heated with 3 heating rods Selectable tamper-lifting conversion for | 2, 4, 7 mm | |||
Electr.-mech.-hydraulical thickness set up to | 30 mm | |||
Automatic thickness regulation by levelling system via reference grade and 2 grade sensors functioning longwise | ||||